Firmware Updates
Support
Firmware Updates
Support
ZYPER EMBEDDED MANAGEMENT PLATFORM - REVISION 3.2.1.40080 RELEASED MAY 26, 2024
ZYPER MANAGEMENT PLATFORM - REVISION 3.2.1.40080 RELEASED MAY 26, 2024
Version 3.2.1.xxxxx of the ZyPer Management Platform is a major release with significant changes to the operating environment. Please review the ZyPer Management Platform Release Notes document before updating.
Supported platforms
- ZyPer EMP (Embedded Management Platform) Server which is embedded in a ZyPerUHD60-2E encoder device.
ZyPer Management Platform GUI web interface
- Google Chrome
ZyPer Encoders and Decoders
- ZyPer4K encoders and decoders
- ZyPer4K-XR encoders and decoders
- ZyPer4K-XS encoders and decoders
- ZyPer4K Quad Encoder for Netgear M4300-96x
- ZyPerUHD encoders and decoders
- ZyPerUHD60 encoders and decoders (Not compatible with other ZyPerUHD devices)
New Features
Server
- ZEMP Server support (no additional MPs can be introduced on the system with the EMP present)
GUI
- ZEMP Server support
- Zeevee CA tab added
- Device ZyPerUHD60-2EMP will only support up to 20 devices.
- ZyPerUHD60-2EMP Encoder
- ZyPerUHD Update Package 5.8 with multiple fixes for the ZyPerUHD60 and ZyPerUHD30 product lines
Bug Fixes in this release
- Product names now match the ones on the Devices.
- (NEW) Fixes for gpg updates – Time changes allow a stable date valid for the gpg package install.
- Resolved multiple issues in this version see section 4 “Issues resolved”
End of support
- No Longer Supported - Gigabyte NUC (Generation 1 Rev A) on Ubuntu v14.04.2
- No Longer Supported - VMWare ESXi appliance on Ubuntu v14.04.2
- ZyPerHD encoders and decoders are no longer supported after ZMP 2.3.1
Installing the new server software:
If updating from version 1.5.2 or greater, follow this process.
Installation Instructions:
- Use the applicable link on the left to download the latest ZMP software. Make note of the location where the software was downloaded.
- In the ZyPer Management Platform GUI, enable the Server panel from the Panel Selection menu.
- Drag the ZyPer update file and drop it in the box that reads “drop file here“. Alternatively, you can click on that dashed box and browse to the file location.
- The ZyPer update file name will appear below the words “Selected file“.
- Click the “Update Server“ button.
- A confirmation box will appear. Click “Update“ to proceed and “Cancel“ to abandon the update.
- Once Update is selected, the confirmation box will disappear, and the ZyPer Management Platform will reboot.
- It may be required to close the browser and log back in for any new features to appear.
or