Firmware Updates
Support
Firmware Updates
Support
ZYPER MANAGEMENT PLATFORM - REVISION 4.0.40300 RELEASED JUNE 24, 2024
ZYPER MANAGEMENT PLATFORM - REVISION 4.0.40300 RELEASED JUNE 24, 2024
Version 4.0.xxxxx of the ZyPer Management Platform is a major release with significant changes to the operating environment. Please review the ZyPer Management Platform 4.0 Release Notes document before updating.
1. Supported Platforms
ZyPer Management Platform
ZyPer Management Platform Web GUI
- Google Chrome
ZyPer Encoders and Decoders
- ZyPer4K encoders and decoders
- ZyPer4K-XR encoders and decoders
- ZyPer4K-XS encoders and decoders
- ZyPer4K Quad Encoder for Netgear M4300-96x
- ZyPerUHD encoders and decoders
- ZyPerUHD60 encoders and decoders (Not compatible with other ZyPerUHD devices)
2. New Features
GUI, Server, and Device
- Visual Analyze Monitor (VAM) BETA version
- 802.1x Support for ZyPer XS/XR and XS wallplates
- ZyPerUHD60 Adjusted Serial Addresses
Server
- Duplicate Multicast Detection and Reporting
- Enhanced Duplicate Address Detection and Reporting
- Correct ZyPerUHD60 product IDs
- Disable Redundancy per server
- Multicast Device Discovery
- ZyPer4K Expansion Encoders - Set Optional Board Type
GUI
- New Zones Panel
- Adjusted main hamburger panel selection order
Device
- ZyPer UHD Low Latency video configuration for ZyPerUHD
- ZyPer UHD60 Dante static IP configuration for Dante enabled ZyPerUHD60-2s
- ZyPer UHD Firmware package 5.8
- ZyPer XS/XR and XS wallplate Firmware package 2.1.0.1
Bug Fixes in this release
- Resolved multiple issues in this version see section 4 of the full Release Notes.
3. End of Support
- No Longer Supported - Gigabyte NUC (Generation 1 Rev A) on Ubuntu v14.04.2
- No Longer Supported - VMWare ESXi appliance on Ubuntu v14.04.2
Installing the new server software:
If updating from version 1.5.2 or greater, follow this process.
Updating from any version before 2.5.3.xxxxx requires a staged update. Please send a troubleshooting report from the Zyper Management Platform(ZMP) to support@zeevee.com so we can check compatibility.
Installation Instructions:
- Use the applicable link on the left to download the latest ZMP software. Make note of the location where the software was downloaded.
- In the ZyPer Management Platform GUI, enable the Server panel from the Panel Selection menu.
- Drag the ZyPer update file and drop it in the box that reads “drop file here“. Alternatively, you can click on that dashed box and browse to the file location.
- The ZyPer update file name will appear below the words “Selected file“.
- Click the “Update Server“ button.
- A confirmation box will appear. Click “Update“ to proceed and “Cancel“ to abandon the update.
- Once Update is selected, the confirmation box will disappear, and the ZyPer Management Platform will reboot.
- It may be required to close the browser and log back in for any new features to appear.
or